To determine the appropriate HOD UV system, we need the following information: UV Transmittance (UVT) at 254 nm Maximum and minimum flow rates Required UV dose Target pathogens Key water quality parameters Additionally, a treatment process flow diagram helps us understand the existing setup. Further information may be required for specific applications such as pH
Yes, you can use your existing flow meter if it provides reliable reading and there are no diversions between the flow meter and the UV system. It is crucial that the flow signal accurately represents the flow through the UV system, with no risk of measuring flow when the UV system is bypassed. The flow
Ultraviolet Transmittance (UVT%) measures how much UV light at 254 nm passes through 1 cm of water. To measure it you will need a spectrophotometer (we recommend using a portable one), quartz cuvettes, and reference water (can be distilled water). How to Measure UVT%: Prepare the Spectrophotometer Turn on the spectrophotometer and allow it to
If no UVT% test sample is currently available, you have a few options: Atlantium personnel can bring a portable UVT% meter for on-site testing during a scheduled visit. Alternatively, you can send a sample to your Atlantium salesperson for testing. Please ensure the sample is in a 100 ml plastic bottle with a sealed cap,
UVT%: Measures how much UV light passes through water, indicating UV-absorbing contaminants. Turbidity: Measures water cloudiness due to suspended particles, reported in NTU. They measure different aspects of water quality and are rarely correlated.
